Elevating platform stages are professional stage equipment that achieves dynamic height adjustment through mechanical drive. Hydraulic Platform Stage Their core value is all about ditching the shackles of fixed heights and unleashing a world of rich, multi-layered visual experiences! They can flexibly adjust the lifting height of single/multi-unit platforms (conventional adjustment range: 0.2-3.0m) according to the performance rhythm and display needs. Heavy Duty Elevating Platform Stage They not only support "prominent lifting" for solo performances but also realize dynamic changes such as "wave-like" and "step-like" movements through multi-unit linkage. They're widely used in places where "stage interactivity and scene atmosphere" are highly demanded, like theater shows, big galas, product launches, fashion shows, and exhibition displays.
I. Diverse Control Modes
They support multiple control methods to adapt to different operation needs:
Local button control: Allows a single person to operate one unit independently.
Remote control: Elevating Platform Stage Enables flexible adjustment within a 50m range.
PLC programming control: Adjustable Height Stage Supports multi-unit linkage and preset lifting trajectories (e.g., "wave-like undulation" and "step-like lifting" in galas).
Some high-end models can be connected to the overall stage control system, realizing synchronized linkage with stage lighting and sound effects Stage Raising Platform.
II. Height and Stroke Customization
Conventional adjustment range: 0.3-1.5m, which meets the "height switching" needs of most performances.
Customized range: Adjustable Lift Stage Can be extended to 0.2m (for children’s plays to prevent falls) or 3.0m (for special-effect platforms in large-scale galas). III. Reliable Structure and Safety Protection
1. Stable Anti-Tilting Design
Each unit is equipped with 4 guide columns (usually made of high-strength steel or aluminum alloy, Wedding Shaped Adjustable Lifting Stage with a diameter ≥ 30mm). Reinforcing ribs are installed diagonally on the frame (spacing ≤ 30cm), and the tilt angle during lifting is ≤ 0.5° to prevent tipping due to center-of-gravity deviation. When multiple units are spliced, an "integrated load-bearing beam" is installed at the bottom to ensure synchronous stability during linkage. 2. Multiple Safety Protections
Overload protection: Electric/hydraulic models are equipped with built-in sensors, Stadium Event Adjustable Lifting Stage which automatically shut down when the load exceeds 10% of the rated value. Emergency support:Just in case the power goes out, our electric/hydraulic models have a great feature. Aluminum Alloy Adjustable Lifting Stage They can be gently lowered using a "manual pump" or a "backup battery", so you don't have to worry about people or equipment getting trapped. Anti-pinch/anti-slip protection: "Anti-collision rubber strips" are installed on the platform edges to prevent pinching during lifting. The panels are made of anti-slip materials (e.g., patterned steel plates, anti-slip PVC) with a friction coefficient ≥ 0.6 to prevent personnel from slipping.
3. Durable Structural Materials
Main frame: Mostly made of Q235/Q345 steel (for dry indoor scenarios) or 6061-T6 aluminum alloy (for outdoor/humid scenarios, with rust resistance).
Key connection parts: Components such as hinges and guide shafts are made of 304 stainless steel to reduce wear and oxidation. The service life can reach 8-10 years.
IV. Strong Scene Compatibility
1. Ground and Environment Adaptability
Ground compatibility: Suitable for flat surfaces such as concrete floors, floor tiles, and dedicated stage platforms. "Adjustable support feet" (adjustment range: ±5cm) are used to adapt to slightly uneven ground.
Outdoor protection: For outdoor use, the hydraulic/electric drive system must undergo "waterproof treatment" (protection rating ≥ IP54), and the frame surface is coated with anti-rust layers (e.g., hot-dip galvanizing, powder coating) to resist rainwater and ultraviolet radiation.
2. Flexible Function Expansion
It supports the installation of standardized accessories without additional drilling (to avoid damaging the structure):
Safety railings: Height ≥ 1.1m, suitable for high platforms.
Steps: Width ≥ 30cm, facilitating personnel to go up and down.
Cable troughs: Used to hide wires and prevent tripping.
Lighting Truss interfaces: Pre-drilled bolt holes on the top for easy installation of stage lighting. 
Wuxi Zhongshengwei Metal Products Co., Ltd.
Contact Now