Galvanized Steel Foldable Stage

Hot-Dip Galvanized Steel Foldable and Demountable Stages

As a category of stage equipment focusing on "high strength, rust resistance, and reusability," hot-dip galvanized steel foldable and demountable stages use hot-dip galvanized steel as the core material, combined with the dual structural advantages of "folding + demounting." They not only retain the high load-bearing capacity of steel but also reduce storage and transportation costs through folding design. Meanwhile, the demountable feature supports flexible size adjustment, making them widely suitable for scenarios with high requirements for "load-bearing and durability"—such as outdoor performances, large-scale exhibitions, celebration events, and long-term fixed venues Galvanized Steel Foldable Stage.

I. "Dual Protection" of Hot-Dip Galvanized Steel

Through the "hot-dip galvanizing process" Galvanized Steel Foldable Stage, hot-dip galvanized steel achieves dual rust protection of "physical isolation + electrochemical protection," with specific performances as follows:

Strong Rust Resistance

The zinc coating effectively isolates air and moisture from contacting the steel. Even if the zinc coating is partially damaged, it can delay rusting through the "sacrificial anode protection method" Lightweight Foldable Steel Stage. For long-term outdoor use Portable Foldable Steel Stage, its service life can reach 8-10 years, far exceeding that of ordinary painted steel stages (3-5 years).

Excellent Load-Bearing Performance

The base material uses Q235 or Q345 low-carbon steel Demountable Stage. The frame of a single 1.2m×1.2m stage weighs approximately 25-30kg, with a static load-bearing capacity of 800-1200kg/㎡. It can carry a band’s full set of equipment, heavy lighting stands, or accommodate more than 10 people standing simultaneously, making it suitable for high-load scenarios.

Good Weather Resistance

The zinc coating is UV-resistant and can withstand high and low temperatures Quick assembly demountable stage.

II. Folding Design

A single stage unit adopts a "dual-axis folding" or "multi-segment folding" structure Aluminum demountable stage. Two people can collaborate to complete folding and storage, and the stages can be stacked in multiple layers during transportation—saving 50% of transportation space compared to fully demountable stages.

Demountable Feature

It supports splicing of multiple units Modular demountable stage and can be combined into any size on demand Demountable stage platforms. Moreover, a single unit can be disassembled and replaced independently Event demountable stage, reducing maintenance costs.

High Stability Coefficient

Steel has a high density (7.85g/cm³), so the stage has a low overall center of gravity. Equipped with "thickened support legs" (diameter ≥30mm, wall thickness ≥2.0mm) and "anti-slip rubber foot pads" (friction coefficient ≥0.7), its anti-tipping capacity is 30% higher than that of aluminum alloy stages—suitable for scenarios such as outdoor strong winds and crowded crowds.

III. Do Not Request "Excessive Weight Reduction

Reject proposals from manufacturers to reduce the frame wall thickness (e.g., frame tube wall thickness less than 2.0mm) or reduce the number of reinforcing ribs (e.g., diagonal reinforcing ribs with a spacing exceeding 40cm) in the name of "portability," to avoid sacrificing load-bearing capacity and stability.

Do Not Arbitrarily Expand the Size of a Single Unit

The maximum size of a single unit should not exceed 1.5m×3.0m. Beyond this size, two people may easily lose balance during transportation, and the frame stress may become concentrated. If a larger size is required, it should be split into multiple units for splicing.

Do Not Omit Rust Protection Treatment

Even for indoor use, it is necessary to require "full hot-dip galvanizing of all parts" (including connectors and support legs). Do not replace hot-dip galvanizing with painting—paint easily peels off, leading to rusting in a short period.